Click Get Details to get more information on a specific product.
You can add the item to your cart or basket from the Details page.
|
|
 |
wastegate actuator arm too short? This is a 4 inch threaded arm.
|
|
|
 |
Bracket to hold wastegate can to t1, t2, t3 or t4 turbo. Also works for some hybrid configurations that have bracket holes on the front cover like turbonectics/Mopar S60. (Will not fit large TO4E housings that have no provisions for the bracket, that requirs are new Z-bracket)
|
|
|
 |
Boost controller, also known as a g-valve, allows you to raise the boost in your vehicle. Please note that when raising boost, careful attention must be applied to make sure you have plenty of fuel and can monitor the a/f ratio or egt's, otherwise catastrophic results may occur.
|
|
|
 |
same dimensions and design as our Spearco Intercooler, but comes with a 3 inch core, not a 3.5 inch core like the spearco. Good for applications to 500hp
|
|
|
 |
Cast aluminum 90 degree elbow, 2.5 inch diameter. Sold individually.
|
|
|
|
Cast aluminum 90 degree elbow, 2.5 inch diameter. Sold individually.
|
|
|
|
Cast aluminum 90 degree elbow, 2.0 inch diameter. Sold individually.
|
|
|
 |
Oil return gasket for all garrett turbos and hybrid turbos
|
|
|
 |
Oil return gasket for all mitsu turbos including late turbo 1 and srt-4
|
|
|
 |
Ported T-2 exhaust manifold. Flows 20% better than stock. Currently offering FREE exterior thermal coating on all ported exhaust manifolds!!!!
|
|
|
 |
Stainless steel t-clamps allows superior clamping force on large hoses. For use on turbo and intercooling piping. 2.25 inch min size.
|
|
|
 |
Stainless steel t-clamps allows superior clamping force on large hoses. For use on turbo and intercooling piping. 3.50 inch min size.
|
|
|
|
Stainless steel t-clamps from Turbonectics allows superior clamping force on large hoses. For use on turbo and intercooling piping. 2.0 min size.
|
|
|
|
Heavy Duty T-clamps for use on intercooling, turbo, or other areas requiring the use of a large hose clamp.
|
|
|
|
Heavy duty T-clamps keep hoses on. Use anywhere and large hose clamp is needed like turbo's, intercoolers etc...
|
|
|
 |
Metal gasket for t3 style rectangular turbo to manifold. Will fit the t-3 lotus head style turbo, will NOT Chrysler style flange
|
|
|
 |
High quality Earls oil fiter and adapter to fit inline your FWD oil feed line. Fits Hybrids, mitsus and garretts. We also have it available with the oil feed too, if you don't already have a SS feed line
|
|
|
 |
Stainless steel oil feed line and inline Earls oil filter for your mitsu, garret or Hybrid turbo!
|
|
|
 |
TurboXS single stage boost controller.
|
|
|
 |
Allows user to install the type H or type H-RFL blow off valve on their car. Includes beaded pipe with TurboXS mounting flange already welded, vacuum hose, and misc.parts package
|
|
|
 |
Awesome sounding BOV from TurboXS. Polished aluminum BOV, comes with a weld on adapter. Holds at least 25 psi of boost.
|
|
|
 |
Large can wastegate actautor from Turbonetics. Comes with threaded arm for easy adjustments. starts to opne at 6 psi, great for cars looking to run 10-25 psi of boost
(bracket and spacer can be bought seperately if needed)
|
|
|
|
Large can wastegate actuator. Comes with threaded arm for easy adjustments. starts to opne at 16 psi, great for cars looking to run 20+ psi of boost
(bracket and spacer can be bought seperately if needed)
|
|
|
